Head Rail For 3 1 2 Vertical Blinds: Everything You Need To Know

How do you measure vertical blind head rail?

Determine Headrail Location: Determine headrail mounting position and mark the spot. Measure Height: Measure height to be covered from top of headrail location to bottom edge or top of bottom sill if there is one. Record the measurement. Allow 3″ for adequate mounting area above the window.

Can vertical blind headrail be cut to size?

In short – yes, you could purchase blinds from your local hardware store or supermarket and cut them to size. Most vertical blinds are manufactured from very pliable fabrics that can be unstitched, cut and then re-glued or sewn into place.

What is a 3 1 headrail?

Multiple blinds or shades can be mounted on the same head rail if the window application requires a split or the window is too large for one shade. The Three-On-One Head Rail allows each shade/blind to operate independently while giving the impression of a single shade or blind.

Are vertical blinds standard sizes?

The Vertical Window Blind is available in a range of sizes with widths between 36”-108” (91-274 cm), heights ranging from 48”-96” (122-244 cm), and an overall rail mounted depth of 5”-6.5” (12.7-16.5 cm). The slat sizes of Vertical Window Blinds are typically between 3.5”-5” (8.9-12.7 cm).

How much clearance do you need for vertical blinds?

Allow 3″ for adequate mounting area above the window. If blind extends to the floor (i.e. to cover a patio door), measure height from the headrail to the floor, and deduct ½” for clearance in order for the vanes to clear the floor.

Can you cut vertical blinds down to size?

Can you cut vertical blinds yourself? Yes, they are the easiest to cut because sharp scissors can cut through them. If the blinds are already up, the first thing to do is figure out where you need to cut. Choose one slat to serve as a guide for the rest.

What does 2 1 headrail mean?

When you have two or three large windows in rows, you may opt for a 2-on-1 or 3-on-1 headrail. This just means that the two or three blinds in a row will operate under the same headrail, giving your window treatments a sleeker, continuous look at the top. Headrails can also provide a decorative touch to your windows.

How do you measure for multiple blinds on one headrail?

Measure the window in three places (top, middle, bottom), as shown in our measuring instructions. For two (2) separate blinds in one window, take the smallest width and divide it by 2. Then add 1/4″ to the width of each blind. (The factory will deduct 1/2″ from each blind.)

How do vertical blinds attach to the rail?

Use the bracket clip to attach the head rail and valance onto the mounting brackets. The valance clips that come with the product will need to be snapped into place at the top of each slat. Slide each of the vertical blinds into place, making sure that they are securely held in by their clips.

Can vertical blinds be replaced?

Replacement vertical blind slats explained Designed to extend the lifespan of vertical blinds, replacement slats are a cost-effective and practical solution. As the name suggests, they are designed to directly replace any louvres/slats you have that don’t match the same quality as the others.

Can you repair vertical blinds?

Vertical top hangers can repair vertical blind and prolong the life of your existing blinds. Replace the top of the vertical slat, then hook on the headrail carriage easily. They will make a difference in the appearance of the whole blind. Use to replace worn, brittle, or missing weights.

How to pick vertical blinds?

Suitability for various window sizes and types: Vertical blinds come in a variety of sizes and orientations, making them suitable for a range of window types. Narrow slats are better suited to more slender windows, while wide slats can be used on larger windows or even patio doors.

How far do vertical blinds stick out?

For vertical blinds, you will want even more overlap: 1.5 inches on either side, for a total of 3 inches. In either case, you may choose to have your blinds extend past the window even farther if you would like more light blockage. Determine how far above the window you will mount the headrail.

Do blinds need to be exact size?

Generally, you’ll want to measure to the nearest ⅛-inch. Outside-mounted blinds have slightly more leeway because they do not need to fit inside of the window casing, but any lack of accuracy could cause them to let in light, protrude, or look aesthetically off. The exception is roller blinds.

How outdated are vertical blinds?

Do people actually still buy vertical blinds? The answer is “definitely”. Vertical blinds continue to stay relevant because they are functional and available in increasingly modern fabrics and materials.

How far apart should brackets for vertical blinds?

Space any remaining brackets evenly, not more than 30″ apart. 3. Mark the bracket mounting hole locations at the desired height, making sure they are level and square. Allow at least 1/2″ clearance for vanes above the floor or sill.

What is the minimum recess for vertical blinds?

Vertical blinds are not recommended inside the recess if the recess is less than 130mm/5” deep – if this is the case it would be better, where possible, to mount the blind outside the recess. Important – when ordering vertical blinds for a recess fit it is necessary to specify that ‘Top Fix’ brackets are required.

What is the maximum width for vertical blinds?

The maximum size for a vertical blind is 5000mm wide. However, we don’t recommend that the blind is made any wider than 4000mm, because installation and maintenance becomes more difficult over this size.

Can vertical blind tracks be shortened?

How to shorten vertical blinds? Even though it may take longer, we recommend cutting the slats one by one to make them the same. You can only shorten vertical blinds from the top of the slat, because you need to use the folded pockets for the bottom weights, which keep the blind in place.

What is the gap between vertical blinds?

The industry accepted clearance gap is expected to be between 5mm to 15mm.

How do you measure face fit vertical blinds?

Measure Face Fit Height Height: Measure the exact height of the area you would like the blind to cover. We recommend the blind overlaps the window by at least 50mm on each edge. If you have an architrave we recommend measuring from outside of architrave to outside of architrave.

How do you measure vertical cellular blinds?

Measure Width: Measure the inside width of window casing in three places. Record narrowest measurement. Measure Height: Measure the inside height from the top of window casing to top of sill in three places. Record longest measurement.

What is a replacement vertical blind headrail?

Which vertical blind headrails are best?

What size headrail for vertical blinds?

Which blinds have a 2 on 1 headrail?