What does CL mean on a washing machine?
Error code CL: Child lock is engaged If you see LG washing machine error codes CL, this means that the child lock is engaged. To release it, you need to press the temp and eco/rapid button at the same time, while holding both for a period of about three to four seconds.
How to reset Maytag washer error code?
Press the Pause or Cancel button twice and the Power button once to clear the code.
What does CL mean in washing instructions?
The letters CL in a triangle on the washing label stand for chlorine and mean that your garment may only be whitened using chlorine bleach. Chlorine bleach. The iron: Ironing symbols.
How to fix SD code on Maytag washer?
Sd or SUD Error Code If you see “Sud” or “Sd” and the Complete Cycle light is on, the washer detected too many suds during the cycle, and your load may not be thoroughly rinsed, or water may not be entirely removed. You may want to select a Rinse/Spin cycle for further rinsing.
What is the CL section on washing machine?
When the child lock is activated, there will either be a key symbol or a “CL” symbol in the display and all the washing machine buttons will be disabled. To deactivate the child lock, press and hold the start button for three to five seconds.
Why is my Maytag washer not draining?
The Drain Pump Filter may be clogged with dirt, lint, or other items. This filter should be cleaned on an occasional basis to keep the washer operating properly. CLICK HERE for more information about cleaning the Drain Pump Filter or see “Cleaning and Maintenance” above.
How do I turn off the CL on my washing machine?
If child lock is enabled, you will not be able to start your machine until the child lock feature is turned off. 5 To turn off child lock, make sure your machine is powered on and then hold the [Child Lock] button for 3 to 5 seconds.
What does error code CL mean?
Does the washer need to be cleaned? The CL code is a reminder to run the Clean Washer cycle and will appear after 30 cycles. The code will automatically clear once a Clean Washer cycle has completed or after three cycles.
How do I turn off the control lock on my washing machine?
On a Front Load Washer or the UltraFast Combo Washer/Dryer, press and hold either the Control Lock or Light-Control Lock pad for 3 seconds to lock or unlock the controls. Some older Front Load Washer models simply had a Lock button. You press and hold the Lock button for 3 seconds to use the feature.
Why does my Maytag washer say control locked?
This is a reminder that you have set the control lock and need to de-activate it to allow the washer controls to function. Some models will look like the following: The control lock may be a stand-alone key, or it could be a dual function key paired with another button like Extra Rinse, Steam, etc.
How do you reset the controls on a Maytag washer?
To reset the washer’s control panel: If your washer is plugged into an outlet, simply unplug the unit for one minute and then plug the unit back in. If the washer is hard-wired to the power supply, turn the breaker off at the home electrical panel that powers the washer for one minute and then turn the breaker back on.
Where is the Maytag reset button?
Maytag washers do not have a reset button, but it is possible to reset them by pressing certain buttons in a particular combination. This is the simplest method to try: Press power/cancel first. Next, pick a fresh cycle to run.
How do I turn off the loc on my Maytag washer?
Press and hold the Control Lock Key for 3 seconds to unlock the machine. You will notice the machine count down from 3-2-1. The control lock may be a stand-alone key or a dual-function key paired with another button like Extra Rinse, Steam, etc.
Why is my washing machine showing CL?
The CL error code on an LG washing machine means that the child lock is active and the settings can’t be changed, and the cycle cannot be started. This is usually because you have turned the child lock feature on which stops the cycle from being changed or started.
What is cl in front load washing machine?
The CL code is a reminder to run the Clean Washer cycle and will appear after 30 cycles. The code will automatically clear once a Clean Washer cycle has completed or after three cycles. CLICK HERE for additional information on cleaning.
What is the CL compartment on a washing machine?
If the bleach compartment isn’t clearly labelled, it may be represented by a triangle with the letters ‘CL’ within. Always check your manual if you’re unsure whether or not your washer is designed to dispense bleach.
How do I clear the LOC on my Maytag washer?
If you do not see the 3-2-1 countdown and are unable to de-activate Control Lock, try pressing the POWER button first, then touch and hold 3 seconds to de-activate control lock. If this does not work, try unplugging the machine or turning off the breaker for 1 minute, then power the machine back on and try again.
How to fix SD code on Maytag washer?
Sd or SUD Error Code If you see “Sud” or “Sd” and the Complete Cycle light is on, the washer detected too many suds during the cycle, and your load may not be thoroughly rinsed, or water may not be entirely removed. You may want to select a Rinse/Spin cycle for further rinsing.
Why is my Maytag washer stuck on lock?
Maytag Front Load Washer Door Will Not Open The door will not immediately unlock while the cycle runs due to a possible high water level in the washer, high water temperature, tumbling, or spinning. It may take up to five minutes for the washer to stop spinning and draining before the door will unlock.
What does a CL code on a Maytag washer mean?
What are Maytag washer error codes?
What does LC mean on a Maytag washer?
What is a CL code on a washing machine?
What is a CL Code?
A CL code is an error code that pops up on your Maytag washing machine’s control panel. Basically, it’s a message from your washer letting you know that something’s not working quite right. These codes can be really helpful in figuring out what’s wrong with your washer, and how to fix it.
Why is my Maytag washer showing a CL code?
This code usually indicates a problem with the control board. The control board is the “brain” of your washer, and it’s responsible for controlling all of the different parts. If the control board isn’t working properly, it can cause a variety of problems.
Common CL Codes on Maytag Washers:
Here are some of the most common CL codes you might see, along with what they usually mean:
CL: This is a general error code that indicates a problem with the control board.
CL-1: This code means there is an issue with the control board or the control board software.
CL-2: This code indicates a problem with the door lock or the door latch.
CL-3: This usually points to a problem with the water level sensor, which measures how much water is in the washer.
CL-4: This code signifies a problem with the fill valve, which is responsible for filling the washer with water.
CL-5: This indicates a problem with the drain pump or a clog in the drain hose.
CL-6: This code usually means there’s an issue with the temperature sensor, which monitors the water temperature.
CL-7: This code points to a problem with the speed sensor, which is responsible for regulating the spin speed of the washing machine drum.
CL-8: This indicates an issue with the washer’s motor.
CL-9: This code means there’s an issue with the timer or the control board software.
What to do when you see a CL code on your Maytag washer
First, you want to try resetting your washer. Here’s how:
1. Unplug the washer.
2. Wait at least 30 seconds.
3. Plug the washer back in.
4. Turn the washer on.
If resetting the washer doesn’t fix the problem, here are some other things you can try:
Check for any loose wires or connections.
Make sure the washer is properly grounded.
Clean the drain hose.
Check the water pressure.
Make sure the washer is level.
If you’ve tried all of these things and the CL code is still appearing, it’s probably time to call a repair technician.
Tips for Preventing CL Codes:
Here are some tips for preventing CL codes from appearing in the first place:
Use the correct amount of detergent. Too much detergent can cause a buildup of soap residue, which can lead to problems with the washer’s parts.
Don’t overload the washer. Overloading the washer can put a strain on the motor and other parts.
Clean the washer’s lint trap regularly. A clogged lint trap can restrict airflow and cause the washer to overheat.
Troubleshooting Your Maytag Washer:
Here’s a breakdown of troubleshooting your Maytag washer based on the specific CL code:
CL Code | Troubleshooting Steps
——- | ——–
CL | Check the control board connections, try resetting the washer, or contact a repair technician.
CL-1 | Check the control board, try resetting the washer, or contact a repair technician.
CL-2 | Check the door latch, ensure the door is properly closed, or contact a repair technician.
CL-3 | Check the water level sensor, clean the sensor, or contact a repair technician.
CL-4 | Check the fill valve, replace the valve if necessary, or contact a repair technician.
CL-5 | Clean the drain hose, check the drain pump, replace the pump if necessary, or contact a repair technician.
CL-6 | Check the temperature sensor, replace the sensor if necessary, or contact a repair technician.
CL-7 | Check the speed sensor, replace the sensor if necessary, or contact a repair technician.
CL-8 | Check the motor, replace the motor if necessary, or contact a repair technician.
CL-9 | Check the timer, check the control board, or contact a repair technician.
Is the CL code a serious problem?
Honestly, it depends on the code. Some codes might just mean a simple fix like a clogged drain hose. Others, like a control board problem, could be more serious and require professional help.
FAQ:
1. What does the CL code mean on my Maytag washer?
A CL code is an error code that appears on your washer’s display, signaling an issue with the washer. The specific number after the “CL” indicates the type of problem.
2. What should I do if my Maytag washer shows a CL code?
First, try resetting the washer by unplugging it, waiting 30 seconds, and plugging it back in. If that doesn’t work, troubleshoot based on the specific CL code.
3. Is the CL code a serious problem?
The seriousness of the CL code depends on the specific number. Some codes might be easily fixed, while others require professional assistance.
4. How can I prevent CL codes from happening?
Using the correct detergent, not overloading the washer, and cleaning the lint trap regularly can help prevent CL codes from appearing.
5. How do I know if I need to call a repair technician?
If resetting the washer doesn’t solve the problem, or if you’re unsure how to troubleshoot the code, it’s best to contact a qualified repair technician.
See more here: How Do I Fix The Cl Code On My Washing Machine? | Cl Code On Maytag Washer
CL Code Error on Maytag Washer | How to remove – YouTube
If your Maytag Washing Machine is displaying an “CL” fault code, this video will explain how to remove this fault. Keep your washing machine running smooth with YouTube
Maytag Washer Error Code CL (The Common Causes Of Error
Maytag Washer Error Code CL (The Common Causes Of Error Code CL And How To Fix The Issue). In this video tutorial I will show you how to fix Maytag Washer Er… YouTube
What Does CL Mean On Maytag Washer? – How To Fix Up
When you buy a new Maytag washer, it seems daunting to figure out what “CL” means. Today, CL is a common practice in many industries, including the automotive sector, How To Fix Up
Maytag Washer Error Codes
All Error codes for maytag washing machine and what they mean as well as what you can check and do to repair the washer. Washer and dishwasher error codes and troubleshooting
What Does CL Mean On A Maytag Washer? (Let’s
What Does Code CL Mean On A Maytag Washer? CL means child lock. It is a washer child lock feature; this code informs you that the control lock is activated. Unlike error codes, this function Home Guide Info
Maytag Washer: Clear Error code – YouTube
How to clear any error code on a Maytag Washer. This works for most of Maytag washers. YouTube
Unlocking the Secrets of the Maytag Washer CL Code
The CL code on a Maytag washer indicates that the control panel is locked. It usually occurs when a button or a combination of buttons is pressed and held for an ApplianceHelpHub
Maytag washer fault codes (Meaning and recommended
Here are the most common Maytag washer fault codes to help you try and diagnose what’s wrong with your washing machine. In summary, we shall look at the following MachineLounge
Maytag Washer Fault Codes – Quick Troubleshoot Guide
If you see the LOC or LC error code on your Maytag washer, it means that the Control Lock feature has been activated. This feature is designed to prevent accidental Machine Answered
See more new information: pilgrimjournalist.com
Cl Code Error On Maytag Washer | How To Remove
Maytag Washer Error Code Cl (The Common Causes Of Error Code Cl And How To Fix The Issue)
Lg Washing Machines Error Code Cl What Is And How To Turn Off
Cl Code Error On Maytag Washer
How To Turn Off Loc Or Lc Error Code On Washers | Whirlpool \U0026 Maytag
Link to this article: cl code on maytag washer.
See more articles in the same category here: https://pilgrimjournalist.com/wiki/